Servo Motor With Driver 3-Phase Or Single Phase 220V 750W 1Kw 1.5Kw Ac Motor
AC Servo Motor Driver Data Sheet
More Servo Motors for your reference
We supply 400W 0.4KW 700W 0.7KW 1200W 1.2KW 1500W 1.5KW 2600W 2.6KW 2300W 2.3KW 4000W 4KW Servo Motor
Driver profile
Low temperature environment: 0 ~ 40 ºC; Working environment temperature: below 80% (no condensation).
Low temperature storage environment: - 40 ~ 50 ºC; Storage environment humidity: below 80% (no condensation).
Vibration: 0.5g below.
Places with good ventilation, low humidity and dust.
Corrosive, pyrogenic gas, oil and gas, cutting fluid, iron powder and other environments.
Places free of moisture and direct sunlight.
Installation method
Horizontal installation: to prevent water, oil and other liquids from flowing into the motor from the outgoing end, please place the cable outlet below.
Vertical mounting: if the motor shaft is mounted upward and attached to the reducer, pay attention to and prevent oil stains inside the reducer from infiltrating through the motor shaft
Motor interior.
The protrusion of motor shaft should be sufficient, if it is not enough, it will easily vibrate when the motor moves.
When installing and disassembling motor, do not knock motor with hammer. Otherwise, it may cause damage to motor shaft and encoder.
Installation environment conditions
1.Working environment: 0 ~ and ºC;working environment: less than 80% (no condensation)
2.Storage environment temperature:- ºC; Storage environment humidity: 80% of the (no condensation)
3.Vibration: Below 0.5 G
4.Well ventilated, less moisture and dust place
5.No corrosive, flash gas, oil and gas, cuttingfluid, iron powder and so on environment
6.No moisture and direct sunlight place
Installation method
1.Level installation:to avoid liquids such as water, oil from motor wire end into the motor internal, please will cable outlet inbelow
2.Vertical installation: if the motor shaft and the installation with reduction unit, must pay attention to and prevent reducer in mark through the motor shaft into the motor internal
3.The motor shaft out quantitymust be thoroughly, if insufficient out to motor sports generates vibration
4.Installation and remove the motor, please do not use hammer knock motor, otherwise easy to cause damage to themotor shaft and encoder
The motor direction of rotation
Looking from the motor load on the motor shaft and counterclockwise (CCW) for the forward, clockwise (the CW) as the reverse
Frequently asked questions:
1. The servo motor driver is sinusoidal driving
2. Al-29 alarm: the brake resistance is not solid, please check the connection again
3. By default, the servo motor is 220V with a high voltage. If it needs to be replaced with 380V, it needs to add 550 yuan. The servo motor above 110 can be made of 380V high voltage.
4. The servo defaults to 1000 pulses per circuit /4 times the frequency
5. The servo driver can be adjusted by conducting at 13 and 25 angles
6. Add 300 yuan to the absolute value of the servo motor and 500 yuan to the high voltage (only 11/130 servo can change the high voltage)
7. Absolute value servo 131,072 pulses per circuit
8. The servo motor power line specification is 2.0, and the servo motor encoder line specification is 1.0
9. The braking torque of the servo motor is about 3 times of the rated torque
10. For internal control of servo motor, change PN003 to 0
11. Brake resistance action of servo motor: it can guarantee the servo motor's emergency stop, positive and negative turn and other functions are effective, and it can absorb heat and prevent overcurrent and other problems. Price 20 yuan
12. The software supporting the upper computer of the servo driver can only realize real-time control and cannot save the program. Using the external 485 serial port requires the customer to provide the software, we do not provide.
13. The type of servo motor driving insert is the matching gran head
AC Servo Motor Application
We also supply other Motors
1.DC Motor
2.AC Motor
3.Gear Motor
4.Brush DC Motor
5.Brushless DC Motor
6.Gear Box
7.Electromagnetic motor
8.Permanent magnet motor
9.Asynchronous motor
10.Synchronous motor
11.Inverter motor
12.Linear Motor
13.Motor Parts
Factory Show
Feedback from Customers
FAQ
-----------------------------------------------------------------------------------------------------
Q1 What is your terms of payment?
Our Service
------------------------------------------------------------------------------------------------------
1.One year warranty for most of our products;
2.We will arrange delivery of the goods on time:
3.Within the warranty period, we will bear all the qulity problem of our produts;
4.Beyond the warranty period, we will despatch the replacement parts to help fix the products;
5.Without any problem, we will gain the feedbacks of our products to help improve better products.
AC Servo Motor Driver Data Sheet
Servo motor parameters table | |||
category | model | parameter | Driver configuration model |
40series(220V) | XK-40AEA01030 | 0.32NM 100W 3000rpm | XKM-30A |
60series(220V) | XK-60AEA02030 | 0.637NM 200W 3000rpm | XKM-30A |
60series(220V) | XK-60AEA04030 | 1.27NM 400W 3000rpm | XKM-30A |
60series(220V) | XK-60AEA06030 | 1.91NM 600W 3000rpm | XKM-30A |
80series(220V) | XK-80AEA04030 | 1.27NM 400W 3000rpm | XKM-30A |
80series(220V) | XK-80AEA07530 | 2.39NM 750W 3000rpm | XKM-30A |
80series(220V) | XK-80AEA07320 | 3.5NM 730W 2000rpm | XKM-30A |
80series(220V) | XK-80AEA10025 | 4NM 1.0KW 2500rpm | XKM-30A |
90series(220V) | XK-90AEA07530 | 2.39NM 750W 3000rpm | XKM-30A |
90series(220V) | XK-90AEA07320 | 3.5NM 730W 2000rpm | XKM-30A |
90series(220V) | XK-90AEA10025 | 4NM 1.0KW 2500rpm | XKM-30A |
110series(220V) | XK-110AEA06030 | 2NM 600W 3000rpm | XKM-30A |
110series(220V) | XK-110AEA12030 | 4NM 1.2KW 3000rpm | XKM-30A |
110series(220V) | XK-110AEA15030 | 5NM 1.5KW 3000rpm | XKM-30A |
110series(220V) | XK-110AEA12020 | 6NM 1.2KW 2000rpm | XKM-30A |
110series(220V) | XK-110AEA18030 | 6nm.1.8KW,3000rpm | XKM-30A |
More Servo Motors for your reference
We supply 400W 0.4KW 700W 0.7KW 1200W 1.2KW 1500W 1.5KW 2600W 2.6KW 2300W 2.3KW 4000W 4KW Servo Motor
l No. | Voltage | Power(w) | Rated Torque | Rated Speed | Encoder Wire | Motor Length | Shaft DIA(mm) | adapter Driver |
60AEA02030-SC3 | 220 | 200 | 0.64 | 3000 | 2500 | 116 | 14 | DM-04EA |
60AEA04030-SC3 | 220 | 400 | 1.27 | 3000 | 2500 | 141 | 14 | DM-08EB |
60AEA06030-SC3 | 220 | 600 | 1.91 | 3000 | 2500 | 169 | 14 | DM-08EB |
Model No. | Voltage | Power(w) | Rated Torque | Rated Speed | Encoder Wire | Motor Length | Shaft DIA(mm) | adapter Driver |
80AEA04030 | 220 | 400w | 1.27NM | 3000 | 2500PPR | 123mm | 19 | DM-055B |
80AEA07320 | 220 | 760W | 3.5NM | 2000 | 2500PPR | 179mm | 19 | DM-08EB |
80AEA07530 | 220 | 750W | 2.4NM | 3000 | 2500PPR | 151mm | 19 | DM-08EB |
80AEA10025 | 220 | 1000W | 4NM | 2500 | 2500PPR | 191mm | 19 | DM-12EA |
Model no. | Rated Voltage(V) | Output Power(w) | Rated Torque(N.m) | Rated Speed(RPM) | Encoder | Motor Length(mm) | Shaft DIA(mm) | Matched Driver |
(Increment) | ||||||||
PPR | ||||||||
XK110AEA12020-SH3 | 220 | 1200 | 6 | 2000 | 2500 | 219 | 19 | DM-12EA |
XK110AEA12030-SH3 | 220 | 1200 | 4 | 3000 | 2500 | 189 | 19 | DM-26EA |
110AEA15030-SH3 | 220 | 1500 | 5 | 3000 | 2500 | 204 | 19 | DM-26EA |
110AEA18030-SH3 | 220 | 1800 | 6 | 3000 | 2500 | 219 | 19 | DM-26EA |
Model No. | Voltage | Power(w) | Rated Torque | Rated Speed | Encoder Wire | Motor Length | Shaft DIA(mm) | adapter Driver |
90ST-M02430 | 220 | 750W | 2.39NM | 3000 | 2500PPR | 150mm | 19mm | DM-08EB |
90ST-M03520 | 220 | 730W | 3.5NM | 2000 | 2500PPR | 151mm | 19mm | DM-08EB |
90ST-M04025 | 220 | 1000W | 4NM | 2500 | 2500PPR | 191mm | 19mm | DM-12EA |
Low temperature environment: 0 ~ 40 ºC; Working environment temperature: below 80% (no condensation).
Low temperature storage environment: - 40 ~ 50 ºC; Storage environment humidity: below 80% (no condensation).
Vibration: 0.5g below.
Places with good ventilation, low humidity and dust.
Corrosive, pyrogenic gas, oil and gas, cutting fluid, iron powder and other environments.
Places free of moisture and direct sunlight.
Installation method
Horizontal installation: to prevent water, oil and other liquids from flowing into the motor from the outgoing end, please place the cable outlet below.
Vertical mounting: if the motor shaft is mounted upward and attached to the reducer, pay attention to and prevent oil stains inside the reducer from infiltrating through the motor shaft
Motor interior.
The protrusion of motor shaft should be sufficient, if it is not enough, it will easily vibrate when the motor moves.
When installing and disassembling motor, do not knock motor with hammer. Otherwise, it may cause damage to motor shaft and encoder.
Installation environment conditions
1.Working environment: 0 ~ and ºC;working environment: less than 80% (no condensation)
2.Storage environment temperature:- ºC; Storage environment humidity: 80% of the (no condensation)
3.Vibration: Below 0.5 G
4.Well ventilated, less moisture and dust place
5.No corrosive, flash gas, oil and gas, cuttingfluid, iron powder and so on environment
6.No moisture and direct sunlight place
Installation method
1.Level installation:to avoid liquids such as water, oil from motor wire end into the motor internal, please will cable outlet inbelow
2.Vertical installation: if the motor shaft and the installation with reduction unit, must pay attention to and prevent reducer in mark through the motor shaft into the motor internal
3.The motor shaft out quantitymust be thoroughly, if insufficient out to motor sports generates vibration
4.Installation and remove the motor, please do not use hammer knock motor, otherwise easy to cause damage to themotor shaft and encoder
The motor direction of rotation
Looking from the motor load on the motor shaft and counterclockwise (CCW) for the forward, clockwise (the CW) as the reverse
Frequently asked questions:
1. The servo motor driver is sinusoidal driving
2. Al-29 alarm: the brake resistance is not solid, please check the connection again
3. By default, the servo motor is 220V with a high voltage. If it needs to be replaced with 380V, it needs to add 550 yuan. The servo motor above 110 can be made of 380V high voltage.
4. The servo defaults to 1000 pulses per circuit /4 times the frequency
5. The servo driver can be adjusted by conducting at 13 and 25 angles
6. Add 300 yuan to the absolute value of the servo motor and 500 yuan to the high voltage (only 11/130 servo can change the high voltage)
7. Absolute value servo 131,072 pulses per circuit
8. The servo motor power line specification is 2.0, and the servo motor encoder line specification is 1.0
9. The braking torque of the servo motor is about 3 times of the rated torque
10. For internal control of servo motor, change PN003 to 0
11. Brake resistance action of servo motor: it can guarantee the servo motor's emergency stop, positive and negative turn and other functions are effective, and it can absorb heat and prevent overcurrent and other problems. Price 20 yuan
12. The software supporting the upper computer of the servo driver can only realize real-time control and cannot save the program. Using the external 485 serial port requires the customer to provide the software, we do not provide.
13. The type of servo motor driving insert is the matching gran head
The input power | Single phase or three phase AC220V -15~+10% 50/60Hz | |
environment | temperature | Using: 0~55ºC Storage: -20ºC~80ºC |
humidity | Below 90% RH No dewing | |
vibration | Belown0.5G(4.9m/S2),10-60 no continue running |
Control mode | 1 Torque mode (internal or external) |
2 speed mode (internal or external) | |
3 Position mode (internal orexternal) | |
4 Position/velocity model | |
5 Position/torque model | |
6 Speed/torque model | |
Control input | servo enables,alarm reset, |
Forward driving is prohibited, | |
Reverse driving is prohibited , | |
External forward torque is limited , | |
external reverse torque is limited, | |
Emergency stop, | |
Zero speed clamp , | |
1 Internal speed command option 1, | |
2 Internal speed command option 2 | |
3 Internal speed command option 3, | |
1 The internal torque command option 1 | |
2 The internal torque command option 2 | |
Control mode switch, | |
Gain switch, | |
1 Electronic gear molecular option 1, | |
2 Electronic gear molecular option 2,Instructions for, | |
Position deviation to clear, | |
Pulse input is prohibited, | |
Proportional control, | |
The origin return to trigger, | |
The origin return reference point. | |
1 Internal location option 1, | |
2 Internal location option 2, | |
Trigger internal position command, | |
Suspend internal position command | |
Control the output | Alarm detection, |
Servo ready, | |
Emergency stop checked out, | |
Positioning to complete, | |
Speed to reach, | |
Reach the predetermined torque, | |
Zero speed detection, | |
Servo motor current, | |
Electromagnetic brake, | |
The origin return to complete, | |
Located close to, | |
torque limit, | |
speed limit, | |
Tracking arrive torque command | |
The encoder feedback | 2500p/r,15 line increment model, differential output |
Communication mode | RS-232 OR RS-485 |
Display and operation | 1.five LED display 2.Four buttons |
Braking way | Through the internal/external braking resistance braking energy |
Cooling way | Air cooled (heat transfer film, the strong cold wind fan) |
Power range | ≤7.5KW |
AC Servo Motor Application
We also supply other Motors
1.DC Motor
2.AC Motor
3.Gear Motor
4.Brush DC Motor
5.Brushless DC Motor
6.Gear Box
7.Electromagnetic motor
8.Permanent magnet motor
9.Asynchronous motor
10.Synchronous motor
11.Inverter motor
12.Linear Motor
13.Motor Parts
Factory Show
Feedback from Customers
Joining in Us,Creat a WIN-WIN
FAQ
-----------------------------------------------------------------------------------------------------
Q1 What is your terms of payment?
A1: For small order,directly pay to us after order confirmed. You pay us online after we make the trade assureance order and send payment link to you or you can pay by paypal.
A2: For big order,we use T/T, 30% in advance, balance paid before shipment.
Q2 What is your terms of delivery?
A: FOB Shanghai,Guangzhou, Shenzhen, Ningbo. Or CIF/FCA/DDP
Q3 How about your delivery time?
A: Generally, for stock goods, we send the goods as soon as we get your payment. for big order, we should consider the detailed request,then decide a time.
Q4 Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings.
Q5 What is your sample policy?
A: We can supply the sample if we have ready parts in stock,sample is free of charge, but customers have to pay the freight cost.
Q6 How do you make our business long-term and good relationship?
A1: We keep good quality and competitive price to ensure our customers' benefit;
A2: We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Our Service
------------------------------------------------------------------------------------------------------
1.One year warranty for most of our products;
2.We will arrange delivery of the goods on time:
3.Within the warranty period, we will bear all the qulity problem of our produts;
4.Beyond the warranty period, we will despatch the replacement parts to help fix the products;
5.Without any problem, we will gain the feedbacks of our products to help improve better products.